Electric seats are one of the parts that play an essential role in keeping the user comfortable while driving the car.
Toc
Because of such a significant influence, it is best to intervene early by manually moving a power seat whenever this position encounters problems. To know how to manually move a power seat in detail, you will need to refer to our article below carefully.
What is The Power Seat?
A power seat is simply a chair model that integrates mechanical and electronic systems to serve the user best. Thanks to these hidden mechanisms, we can easily change the angle and flexibly control the seat to our liking.
To operate, the power seat will need energy from the battery inside our vehicle but many other electronic devices. So equipping your vehicle with a quality battery model such as interstate batteries will be highly effective in preventing possible problems with this part.
Nowadays, it is not too difficult to see power seats on new car models, especially products from high-end brands, because these chairs give users the feeling of turning extremely comfortable.
Reasons For Failing Power Seats
There are many reasons why the power seat is stuck and cannot be as the user wants. As with a seat belt jam, an electric seat jam can result from the mechanical mechanisms inside the unit not working correctly for whatever reason.
Usually, these problems are more likely to be caused by debris stuck somewhere in the power seat system. If this is the case, you should seek professional services to get the power seats working again.
In addition, the electrical control system inside the device, such as a broken fuse or a broken wire, is often the main problem that makes the power seat numb. If these problems occur, you will still be able to rotate and mechanically manipulate the chair but certainly cannot use the automatic functions as before.
Failing Power Seats: Try These First
Before entering the manual electric chair alignment operations, you should check the following factors first to restart the chair if you are lucky or at least find why this part is not working.
+Push the chair down while moving
One of the most straightforward actions to influence the mechanisms inside the chair is to try holding on to the switch and moving the chair in the desired direction. With this operation, you need to push the chair down with considerable pressure and move backward or forward. In addition, we can also apply it to other directions, such as moving to the sides
+Loosen seat bolt
The tension that builds up between the seat and the bolts connecting this position to the rails becomes a natural lock and disables the power set’s ability to rotate. So loosening these fixing bolts can give the chair space to maneuver and restore the unit’s operation.
+Re-align the transmission cable
Ensure the three cables connected to the seat’s powertrain are working correctly and without any problems or issues. One of the most common causes of power chair immobility is a problem with three cables or all three.
+Check the electrical system.
Don’t forget to check the wires and the power supply system under the seat.
Materials you need before repair.
With these tools pre-prepared, your manipulation process will become much simpler and faster.
- Glove
- Protective glasses
- Screwdriver
- Winder
- Drill or pliers
- Scissors or knife
- Bolt cutter
How To Manually Move A Power Seat?
If you follow the steps below, you will be able to manually move a power seat in the most straightforward and least time-consuming way. Although it is not too difficult to manipulate, it is best to monitor carefully to get the most accurate actions.
+Remove The Seat
To access the components under the seat, we must remove the heart first. However, you should note that make sure the engine is completely turned off as well as ensure all safety standards when operating because negligence can lead to accidents such as when we work under the car without a lift.
If the above criteria are met, you will have to remove the seat from the car by separating the entire seat or just cutting the back part with scissors or a knife.
+Slicing the Spring Mesh
After disassembling the seat, you will find spring nets underneath this unit.
At this point, use pliers or a bolt cutter to cut the spring meshes under the car seat. At this stage, you will need to be careful not to tear or damage any other nearby parts, or you will face even more complicated problems.
+Control of axes
Through the mesh panels will be the shaft parts that attach the seat to the system below. Here you use pliers to move the shaft to position the chair the way you want.
Rotate the pole to the left if you’re going to move the seat forward, and rotate the post to the right to move the seat backward.
+Test Drive
Reassemble all parts, then conduct a test drive to see if the problem is resolved.
Frequently Asked Questions(FAQ’s)
+Are the steps the same for all car models?
Usually, most of the adjustments to electric seats on different brands are quite common. Because almost all-electric car seats are in the same way. However, you should still consult your dealer about electric seat repair before proceeding.
+How do you jump a power seat?
The seat can be from an alternative source, such as the 12V battery used for the power drill. However, the stability will not be excellent. The usage time is only equal to the time we drive after resetting the computer to pass the emission test.
+How much does it cost to get a power seat fixed?
The average electric chair motor replacement cost is between $523 and $551. Labor costs are estimated between $106 and $134, while parts cost $417.
Conclusion
Although the steps to manually move a power seat are not too difficult, I hope you have paid attention to the knowledge contained in today’s article because this information will bring you precious experiences.
