It will certainly not be too strange for those who often use cars with the phrase “StabiliTrak“. It is a force control system for your vehicle. Thanks to that, users can move on slippery roads more efficiently.
Toc
However, sometimes the sensitivity of this feature causes your car to slow down or not accelerate even though driving conditions allow it. The following article will help you turn off the horsepower control system for Toyota, Ford,…
What Is Stabilitrak?
Stabilitrak is the name of an electronic control system with the abbreviation ESC. The primary purpose of this unit is to control the car’s speed.
It will help minimize possible slippage, affecting the safety of both people and vehicles. In addition, when the Stabilitrak system is activated, your entire wheel will be slowed to a safe level. Thanks to that, users can control the vehicle’s movement trajectory in time.
Stabilitrak is present in many different car models: Toyota, Ford, Honda, GMC, etc… This feature is part of the car’s adaptive and protection system. in case of emergency.
Manufacturers have recognized the importance of Stabilitrak. As a result, they proceeded with the rollout to all versions of the enterprise vehicle. Therefore, in almost all car manufacturers, you can come across a force control system for cars.
The Reason For The Stabilitrak Light To Appear
#Input sensor
If you have learned about StabiliTrak, you will probably know the sensor. The manufacturer will need to use a susceptible sensor to enable the feature. Because in all cases, the slippery will only take place in about 2-3 seconds.
It is the sensitivity of the sensors that sometimes causes it to fail. At that time, although you are still moving in a safe trajectory, the system still activates the car’s horsepower reduction feature.
Doing this will cause your vehicle to fall into a state of slowing down without being able to accelerate. You will need to replace the sensor with a new one to fix it.
#Controller faulty
The faulty controller is the next cause for a StabiliTrak warning to appear. In this case, a power control module (PCM) could be the culprit you need to consider. With this breakdown, it will appear more in extreme weather conditions. Therefore, users pay attention to the controller and fix the problem as soon as necessary because the sluggishness will make you unable to accelerate the car.
#Bad connection
A broken GM-LANdline causes poor connection. To protect the transmission’s wiring and critical components, you’ll need to mount a heat shield over the transmission.
However, when plastic is at high temperatures for long periods, it can become denatured. At that time, the stiffness and elasticity will be significantly reduced. As a result, you will need to replace the heat shield regularly to ensure that the wiring is secure.
How To Turn Off Stabilitrak On Some Cars?
#Ford
- Step 1: Press the temperature control button on the steering wheel and release it immediately.
- Step 2: Press and hold the control button for 2-5 seconds. The force control feature will then turn off.
In addition, with the Ford version, you can use it differently:
- Step 1: Enter the car menu system and check the steering wheel control button under the dashboard
- Step 2: Find and press the black arrow that appears to the left of the steering wheel
- Step 3: Go back to the settings management section and click on the accept item. Once you’re done, you’ll get more options.
- Step 4: You should select the item “driving assistance” and click “OK”
- Step 5: Select the option “Driver controls” and press “Ok.”
#Volkswagen
- Step 1: You need to convert your car into accessory mode. At this step, you need to make sure that the ignition position is held correctly. However, you will not be allowed to start the engine.
- Step 2: Put your hand on the warning temple
- Step 3: If you are wondering about the location of the warning light, find the button with the triangle shape and press it.
- Step 4: You need to press the gas pedal. This work should be gradual. You will need to do it 5 times in a row.
- Step 5: At this time, the car will go forward by pressing the gas pedal. At the same time, the TC system will work again.
#Toyota
With Toyota versions, because it has a VSC button, it is easier to turn off the force control system compared to other models. With this car company, you will need to follow these 2 steps:
- Step 1: Press and hold the VSC button for a few seconds
- Step 2: Once you have done this step, it will disable VSC and TRAC. You will then receive a VSC OFF message and a TRAC OFF message.
Frequently Asked Questions(FAQ’s)
1.What is StabiliTrak fix?
To repair stabilitrak, you will need to follow these 4 steps:
- Step 1: Stop and turn off the car
- Step 2: Wait for about 20 seconds
- Step 3: When you start the vehicle in standby mode, the notification will disappear
- Step 4: If the message does not disappear, you will need the help of technical staff.
2.What happens when you turn off StabiliTrak?
At this point, you will receive an urgent message from StabiliTrak. At that time, if you move to a slippery road or exceed the allowed speed, the wheel system will not be stopped.
3.Should you turn off the StabiliTrak?
No, it would help if you did not disable system stability because this feature is suitable for users. It will help you ensure safety when speeding or moving on slippery roads. Disabling the stability system can sometimes be detrimental to the driver.
4.Does StabiliTrak affect transmission?
Yes. StabiliTrak will affect your transmission because it will make your car unable to accelerate. After all, your wheel system is broken.
Conclusion
Hopefully, the article will help you better understand the StabiliTrak system. With this system, it will help you to control the speed exceptionally well. The sensor system will help your wheel system brake in time.
From there, your vehicle will be on the correct trajectory. However, sometimes the sensor is too sensitive, which can cause your car to be unable to accelerate. You should not turn off this system because the safety factor it brings will help you minimize the dangers.
