It is almost impossible for us to avoid problems or problems that may occur during the operation of a vehicle. Therefore, accessing and repairing the details on the car from simple to complex is something that every user needs to do.
Toc
However, most manufacturers arrange a large amount of information under the car’s floor, which makes it difficult for us to access, especially when there is no lift like in stores.
So, How To Work Under A Car Without A Lift ? Today’s article is the answer.
Is It Possible To Work Under The Car Without A Lift?
In fact, the answer is always yes. Although it is a bit more complex, you can work under a car without a lift. Lift alternatives are also quite diverse, from professional tools to lift vehicles to temporary tools or even existing terrain structures that can also be available to create clearance.
In general, in addition to the elevator, you still have ways for us to use it in an emergency, especially when you need to move quickly with a spare tire.
However, you should note that these methods cannot provide a comfortable enough space to be easily manipulated as lift creates. So you will have to face difficulties in repairing in this situation, which takes more time and effort.
In addition, safety is also a big challenge for those who want to repair underneath the car without lifting. Because most of the alternatives are not a good way for us to use them in the long term and we can’t rule out the risk of an accident at any time.
How To Work Under A Car Without A Lift?
As mentioned above, there are many ways we can work under the truck without a lift. And here are the most common ways that many other users have done that you can refer to.
+Take advantage of the slope of the terrain.
Taking advantage of the available slope is one of the most common field methods in situations of need.
In the case of moving through areas with less flat terrain with steep slopes, we can easily take advantage of this type of terrain.
Then you can consider the curbs, sidewalks, or even driving up hills or down ditches, where there is a difference in height to use as a platform for the vehicle.
If you only need to raise one wheel, the quickest way is to steer the vehicle at an uphill angle to get the necessary leverage. To increase the rear or front wheels, drive up or back at an angle that only lifts the half of the vehicle you need to do.
+Dig a hole under the car
If you have a shovel or other digging tools available and are in an area with soft ground, you can use this simple method to access the bottom of your vehicle.
Although it can be a bit laborious and time-consuming compared to other methods, digging is never a useless option, especially in times of emergency.
+Uphill to the car
Some people have a habit of carrying folding ramps to bring their vehicle upon the elevated steps. And besides this function, the car ramp can also be a great tool to lift the car without using a tool like a lift.
+Wood block
It may be a rather unorthodox method, but using wooden blocks stacked to a certain height is one of the suitable ways to prop up the vehicle and give the car the necessary size for you to manipulate the side under the bottom.
The steps are also quite simple when you need to stack the wooden blocks up, then push the cart to the position of the blocks, and you will get the necessary leverage to lift the vehicle.
However, it should choose wooden blocks that are hard enough not to cause problems.
+Jack
Types of jacks, from hydraulic to pneumatic, are always one of the great options for us to lift the car without the support of large lifts.
Of course, with so many configuration options, you will need to research carefully to get the most suitable opportunity to bring along during the trip.
+Air Lifting Bag
This is a relatively new type of equipment and extremely high quality for you to lift and manipulate underneath.
Theoretically, the Air Lifting Bag also works like our vehicle’s SRS. By unpacking the bag and filling it with air, the device generates enough force to push the vehicle’s wheel up.
Safety Rule For Working Without A Lift
Image source: Mohawklifts.com
We all know that working under a car without a lift is not easy. So to ensure your safety, you will need to adhere to the following rules.
+Choose the right terrain
Each vehicle possesses a considerable mass, so if in terrain with too weak ground, there is a high chance that subsidence may occur and endanger those operating below.
In addition, a more open environment and close to people will also help increase safety because these locations can minimize the risk of unexpected factors.
+Do not leave people or pets in the vehicle
Adding weight and people or pets on the vehicle can throw the car off balance, leading to sliding off the vehicle’s lifting structures, thereby creating catastrophic accidents.
+Do not place your body under a vehicle lifted
If you only use weak lifts such as wood or rely on terrain factors, you should not put your body underneath to eliminate the most dangerous elements.
Instead, you should only repair parts on the car like the transfer case control module while waiting for help.
+Take to the helper
Don’t risk making repairs when no one else is nearby. This precaution allows us to ensure safety even in an accident.
Frequently Asked Questions(FAQ’s)
+When is it not advisable to work under your car?
You should not risk working under a car without a lift whenever safety is not guaranteed.
+What is the cost of lifting equipment?
Lifting jacks usually range from $ 100 to $ 500, depending on the structure and operating principle.
Conclusion
Working under a car without a lift has never been safe and easy. So through today’s article, we hope to guide you on how to work under a car without a lift so that you can do it most safely.
