One of those maintenance activities is transmission flush. This work will be pretty complicated and time-consuming. So, how long does a transmission flush take?

In fact, each car model will have a different replacement time. It usually takes 3-4 hours for professional car repairers to complete this process. Follow the article below for a complete explanation.

What Is A Transmission Flush?

Over time, transmission fluid will accumulate dirt. These impurities will hinder the transmission of the engine, thereby reducing the vehicle’s performance.

Therefore, transmission flush removes these impurities from the environment and replaces them with new fluids. Dirt will no longer be a hazard to your engine.

You need to perform a transmission flush after the car has traveled about 15,000 miles. This number can increase or decrease depending on how often you use your car. You can consult mechanical repair experts for more necessary information.

Why Is Transmission Flush Necessary?

A transmission flush is a necessary maintenance job for all vehicle models, which will help your vehicle run smoother. The dirt inside the automatic transmission will be discharged to the outside. Thanks to that, the transmission lines will always be clear.

So, if this process is not done, what will happen? Dirt will be the culprit creating a blockage inside the transmission line. When this part does not have ventilation, your car will not function properly.

If you do not follow the experts’ instructions, you will have to spend a considerable amount of money repairing the entire car.

How Long Does A Transmission Flush Take?

The transmission flush process will take quite a while. An experienced mechanic will also take 3-4 hours to complete. They will use industrial pumps and common dischargers to do this. During this process, old liquids with a lot of dirt will be flushed out.

On the other hand, this activity may take less time. If the fluid in your automatic transmission is low in the scale, it will only take you about 2 hours to complete. As for cars with a lot of dirt inside, you will need to use a lot of time.

In addition, the time to complete this job will depend on the model of vehicle you are using and the person performing it. If you go to professional repair centers, you will not wait too many hours.

Signs To Replace Transmission Fluid

The replacement of transmission fluid is essential. So, if you notice one of the following signs, make time and rush to your local repair center:

Dark brown fluid

Automatic transmission fluid will usually be bright red. If you detect a change in the color of this product, you need to perform a transmission flush promptly.

Usually, a liquid that turns dark red or brown signifies that it’s time for a replacement. The color change means that the dirt has adhered to the gearbox and changed the color of the liquid. Like the Toyota oil filter, if you don’t find a way to fix it, the quality of the car will drop significantly.

Transmission flipping

Another very recognizable sign is motion slippage. This phenomenon occurs when your engine and other components are not working correctly. The engine noises will also be heard when you start, but there is no immediate response.

Not only that, some liquid will leak out when you move. It would help if you did not attempt to drive in this situation, which is very dangerous for yourself and those around you.

Shifting feels different

Shift problems are also signs that you need to have your vehicle serviced immediately. When shifting, they make a sound that catches your attention.

In addition, your feeling when driving will also be different. At this point, you need to pay attention to the automatic transmission to check if any liquid is leaking outside. If so, you need to replace the transmission fluid to be safe quickly.

Does Transmission Flush Affect Car Quality?

Many people think that transmission flush can degrade the quality of the car. But the reality is not so. This operation is simply trying to flush out the dirt inside the automatic transmission, and it won’t harm your vehicle.

There are 2 ways to automatically drain the liquid on the market: external discharge and complete discharge. Both of these types will not reduce the quality of your car. They even help prolong the life of your beloved car.

Specifically, the process involves removing the drain plug and replacing it with new fluids for external flushing. This activity will not take too much time. As for the full flush, it will take you about 3-4 hours to complete. 

This work includes flushing, cleaning, filling, and a second flush. When finished, the automatic transmission fluid will be completely clean, and the transmission line will also be more open.

Conclusion

A transmission flush is an essential operation to enhance the car’s performance. You need to pay attention to maintenance as directed by mechanical experts to keep your car in the best condition. I hope the above article has helped you grasp the time it takes to perform the transmission flush and the importance of this work.

Share0

Tweet

Share

Mixing them is not recommended by experts because it affects the car’s immediate performance. Especially high-end cars that require high-octane gasoline will have reduced performance and increase the risk of the engine explosion.

So, Can You Mix Regular And Premium Gas?

Here is the correct answer to the above question. Our article will help you understand this problem.

Regular Vs Premium Gas: Main Difference

Before understanding the problems that will occur if you mix regular and premium gas, we need to distinguish these two types of gas. And to know the difference between them, you need to know exactly what the octane number is.

The octane rating of gas represents when improper combustion can occur. The higher the octane gas, the less likely it is to burn at the wrong time or, in other words, the wrong way.

In general, Premium has a higher octane rating than regular gas. Premium octane ratings range from 91 to 93, depending on where you live. A few places offer premium octane levels above 93, while the regular gas octane is 87.

Usually, high octane gasoline is the ideal choice to prevent the engine from detonating. So today, people tend to use Premium over Regular gas for regular cars. Lower level pings are not harmful to the vehicle, but repeated engine knocks are necessary for accelerating wear and tear, causing engine damage. By then, you will need to recondition a car battery.

Can You Mix Regular And Premium Gas? 

+For regular car

Once a Honda dealer asserted that there are no significant problems if you fill the Premium gas and the regular car. Some people believe that investing in Premium gas for vehicles will help clean parts in the fuel system. However, experts say that’s not true.

A non-high pressure engine, originally designed to burn 87 octane gas, meaning it has no danger of explosion. So if you use premium gasoline, you won’t get any benefit. Moreover, applying this method only costs you a significant amount of money on meaningless work.

+For high-end cars

There was a case where using Regular gas with an octane rating of 87 on a proposed premium fuel vehicle resulted in an engine explosion a few years ago. And the point worth mentioning is that the car started ramming right after refueling without any other collision.

But that problem almost does not happen today because cars today have more modern ECU engine control units. If you put the wrong fuel in your luxury car, the ECU will automatically adjust the timing and performance of the engine to match. As a result, the vehicle will operate better and safer even when you use Regular gas.

However, we still do not recommend using low octane fuel regularly as it is a cheaper option. The manufacturer built the vehicle to use high-octane gas, so it’s best to stick to it to be on the safe side.

Does Gas Premium last longer?

You won’t get the benefit if you use Premium gasoline with a higher octane rating than the manufacturer’s instructions suggest. In a statement by the federal trade commission to consumers, it is clear that using higher octane gasoline does not bring any benefits at all while the price is higher. Specifically, it does not make your car run smoother, perform better, or go on more terrain.

However, Premium gas allows you to run more miles per gallon. In fact, you’ll get significantly more fuel economy between Regular and Premium gasses from the same manufacturer. Although this benefit is commensurate with the price, it is also an advantage that makes many people use Premium gas for standard cars.

Frequently Asked Questions(FAQ’s)

+Will regular gas damage my premium car?

Most cars on the road now have an 87- or 89-octane standard recommendation for gas. And you can put Premium 90-93 octane gas in your classic car. However, applying ordinary gas to a high-end car will increase the risk of the engine burning the wrong way and, at the same time, reduce the performance and power of the vehicle, even causing the car struggles to start after putting gas in.

+Do turbochargers need premium fuel?

In general, most car manufacturers with turbochargers recommend users to use premium fuel for them. However, it is not completely recommended to be sure to check the accompanying manual. There will be detailed indications for your car in the manual, including the type of gasoline to use.

+Why can’t California have 93 octane?

The problem lies in the environmental perspective. Because MTBE is a carcinogen that can leach into and contaminate groundwater, it was banned in 2003. so California refineries used in gasoline were reformatted.

Conclusion

In short, you should not mix regular and premium gas for any vehicle. The combination does not benefit a car that is said to use Premium or Regular gas. 

It can cause your vehicle to run smoothly, so except in certain unavoidable cases, it’s best to stick to your vehicle’s recommended readings. Finally, you must have your car checked and serviced regularly to ensure that its performance remains good.

Share0

Tweet

Share

Do you own a Toyota car and are curious about Who makes Toyota oil filters? Then this article is for you.

Let’s refer to the following content to better understand the Oil filters on Toyota cars and their manufacturers.

What Is Toyota Oil Filters?

First of all, you should better understand the characteristics and functions of the Oil filters to operate a car, specifically a Toyota car.

Simply put, the car oil filter has the effect of filtering and removing the dirt, impurities, metal particles in the hydraulic oil.

In terms of operating principles, the oil filter system of the hydraulic filter will receive the dirty oil that has been operated and filter it, removing impurities and heavy metals to bring clean oil, meeting the customers’ needs to operate the next machine.

This part has an essential function and affects the performance of the vehicle. Therefore, any car needs this filter to ensure the car moves better, and at the same time, avoid damaging other parts.

In terms of structure, the oil filter includes details: Non-return valve, filter element, Safety valve. Usually, the location of this part is under the car engine.

In addition to the oil filter, the coolant is also an important component that helps protect engines and prolongs their life. You can refer to some Toyota antifreeze equivalents for a suitable choice.

Role Of Oil Filters

As mentioned, Oil filters have an essential role in the car’s operation. Because, after a period of use, the lubricant may appear dirt, metal debris during the process of fighting.

At that time, the oil in the system turns dark because it is not filtered clean. If this situation is not handled, it will reduce the life of the equipment, cause fire and explosion, and be dangerous during use.

Therefore, you need an oil filter to remove dirt, metal debris to clean the oil to help the car operate better. It can be that this part also contributes to protecting the engine and increasing the life of these parts thanks to its ability to limit engine overheating.

Besides the operation of the oil filter, to ensure the vehicle’s smooth operation, you should also take care of the transmission operation. So you need to know how long a transmission flush takes and optimize the process.

Who Makes Toyota Oil Filters?

A question that people are very interested in is Who makes Toyota oil filters?

Although this part was previously a product of Toyota Motor Corporation, as the business has grown, the manufacturer has focused more on producing the main features.

Therefore, Toyota no longer directly manufactures oil filters but uses a product from Denso. In other words, the OEM manufacturer of Toyota oil filters is the Denso company.

However, you can rest assured about the quality of the product. Because both Toyota and Denso are Japanese companies with the view that quality is the top criterion.

Moreover, some sources indicate that Toyota owns up to 25% of the shares in the company that manufactures the oil filters for it. As such, it can be that these two companies have a deep relationship, and the components are in line with the standards of this leading car manufacturer in Japan.

Frequently Asked Questions(FAQ’s)

Besides, if you want to understand the oil filters, please refer to the following content. Below, we have compiled some common questions about this part that you may be interested in yourself.

+Where are genuine Toyota oil filters made?

First, besides the question about the manufacturer, the place of production of genuine Toyota oil filters is also a topic that people are pretty interested in.

Many argue that it is famous for producing high-quality auto parts called Denso in Thailand. However, to ensure the convenience of production and complete assembly, Toyota decided to establish production sites in many other locations worldwide.

+What company makes oil filters for Toyota?

Toyota may use oil filters from different companies. However, the most popular is still the product of the Japanese company Denso, also known as Nippon Denso.

That is to say, and when you want to search for an oil filter for a Toyota, you just need to see the Denso brand manage oil filter product.

When you’re driving, you’re sure to enjoy connecting to a Bluetooth speaker. However, what will you do if you encounter a Toyota Bluetooth greyed out situation?

+Does Toyota make oil filters?

Basically, Toyota does not make its oil filters, but it uses Denso products. However, Toyota holds a 25% stake in the company that produces this filter.

Thus, you can be completely assured of the quality and suitability of the oil filter on Toyota vehicles.

Conclusion

In short, oil filters play an essential role in the operation of car engines. As you know, Toyota does not manufacture this part itself, but Denso manufactures Toyota oil filters.

Through this article, we hope you have been able better to understand the characteristics and capabilities of this part. Therefore, take the time to check and handle problems regularly to keep your car in top performance.

Share0

Tweet

Share

Besides the pennzoil vs mobil 1 controversy, there are many comparisons between the two flagship products of this brand, the Pennzoil Platinum Vs Ultra Platinum. For newbies, not everyone understands the difference between them. They are synthetic oils and have the same base oil but have different points.

Therefore, this article will provide you with information and give the most objective and specific comparison for everyone.

About Pennzoil Platinum

Pennzoil Platinum engine oil is a synthetic oil product that includes additives to help increase outstanding performance. Therefore, this engine oil is always one of the products that many people love and like.

In addition to providing ideal vehicle performance, Pennzoil has excellent cleaning capabilities. It will clean up to 40% more of your pistons than conventional synthetic engine oils, especially in cases where the Pistons operate at high temperatures and pressures. Pennzoil oil contains platinum with maximum cleaning ability.

Furthermore, if you use Pennzoil oil in your vehicle, it can typically last up to 500 miles within a year. The product’s ability to resist friction is excellent. At the same time, you will also notice your engine cooling down when operating in high temperatures or overheating. It supports your car very well during operation with all different conditions.

About Ultra Platinum

Ultra Platinum Synthetic Oil is rated as one of your car’s best and most potent engine oils. The manufacturer uses Pureplus Technology with principles from the conversion of purely natural gas. Therefore, Ultra Platinum Synthetic Oil is safe for the environment humans and contains fewer impurities, better than conventional crude oil.

Thanks to state-of-the-art manufacturing technology, Ultra Platinum creates extreme performance and helps to handle the most agile road situations. 

Like Pennzoil Platinum, Ultra Platinum also can clean and protect the engine. As a result, the pistons will be 25% cleaner than conventional oils currently on the market, saving fuel and providing better overall engine performance.

No matter what type of vehicle you own, you can use Ultra Platinum in different weather and terrain conditions. In contrast to Pennzoil Platinum, Ultra Platinum can work best in cold weather.

Pennzoil Platinum Vs Ultra Platinum, Which is better? 

Here are the features to help you identify and distinguish Pennzoil Ultra Platinum vs Pennzoil Platinum the fastest:

Variety Based on Viscosity

If you’re a geek and curious about engine oils, you’ll be able to distinguish Pennzoil Ultra Platinum and Pennzoil Platinum based on composition, including viscosity.

Specifically, Pennzoil Platinum divides into 7 different categories based on viscosity. These include 0W16, 0W20, 5W20, 5W30, 5W40, 10W30 and 10W60. In addition, environmentally friendly lubricants such as Pennzoil Ultra Platinum have five viscosity grades: 0W20, 0W40, 5W20, 5W30, and 10W30.

Where W stands for “Winter” indicates different operability in different temperatures and seasons. Also, the number preceding “W” denotes the viscosity grade, which helps to operate well in cold or seasonal conditions.

Engine Compatibility

Both synthetic oils are compatible with SUVs, trucks, personal vehicles, and off-road vehicles. The two-product supplier received GM dexos1 from General Motors for compatibility with gas engines of 2011 and later models such as SAE 0W-20, 5W-20, 5W-30 Platinum, and SAE 0W-20, 10w30 and 5W-30.

Platinum oil pre-ignition and low-speed ignition will no longer make the engine quieter and more durable. It is suitable for modern turbochargers and old diesel engines.

Conversely, Ultra Platinum can be available on old and new car models. It is suitable for high-performance cars such as sports and luxury cars powered by diesel and gasoline engines.

Piston Cleanliness

Both lubricant products give you better piston cleaning than the competition. It works well even in bad conditions helping to reduce oil build-up.

While Pennzoil Platinum engine oil can clean car pistons up to 40% more than conventional products, Ultra Platinum can clean more than the Platinum variant.

Frequently Asked Questions(FAQ’s)

Why is high mileage oil not Dexos approved?

There are many reasons why oil cannot receive approval from Dexos. They can be due to the viscosity, oxidation, and calcium content of the newer 2nd generation dexos1. Another cause can come from the manufacturer not providing testing or not approving.

Can You Mix Pennzoil Platinum and Ultra Platinum?

You can easily find information about blending Pennzoil Platinum and Ultra Platinum engine oils on the internet. They give different arguments for do’s and don’ts.

However, after researching and synthesizing, we recommend that you do not mix the two products. It can happen to reduce the efficiency of the mixture, which in the worst case can lead to unnecessary fire and explosion.

How Many Miles Does Pennzoil Platinum And Ultra Platinum Last?

Most of the motor oil products on the market have specific tasks. In addition, when you consider the performance of Pennzoil Platinum and Ultra Platinum, you can see that they both have more ability to stop a transmission leak and use less oil.

For this reason, some suppliers provide data on the distance you can travel with this engine oil up to 75,000 miles.

Can you go 10000 miles with synthetic oil?

Synthetic oil is an oil that allows you to use your vehicle for more than 10,000 miles. However, the product’s lifespan that you can receive will depend on many things. Some models can even last up to 15,000 miles or more.

Conclusion

The article has provided the most basic and objective information to all readers. We hope you have been able to tell the absolute difference between these two engine oils. In particular, Ultra Platinum can clean and create higher performance than Pennzoil Platinum.

In addition, you need to be aware of adding engine oil to your vehicle periodically, depending on the distance and shape you travel. It will make the operation smooth and the driving experience more favorable.

Share0

Tweet

Share

However, thanks to modern technology, there are many types of transmission fluid with superior features.

If you are looking for T-iv Transmission Fluid substitute, this topic is just for you. Below, we list the outstanding features and recommend the best quality liquids.

Uses Of T-Iv Transmission Fluid Substitute

T-IV transmission fluid is a product from the Toyota brand. Just like toyota oil filters, devices will have the brand name visible on the packaging. If you buy items that do not have a brand name, these products may not be qualified.

As we said above, T-IV transmission fluid can protect the engine from dangers outside the environment. This product will create a film to prevent dirt contamination.

As for replacement items like ATF, in addition to protecting the engine, they will help you lubricate all the parts. Thanks to that, the equipment inside will not encounter rust or corrosion. At the same time, this product will also help your car operate smoothly on all terrains.

Key Features To Look Out For

Although there are many different transmission flush products, not all are of good quality. Here are 3 features that you need to pay attention to:

+Thermal stability

The first factor is thermal stability. Each terrain will have a different temperature. So your transmission fluid must adapt to every route. They will have to be adjusted to the right temperature to avoid and avoid the possibility of decomposition.

Otherwise, this product will not protect the engine from environmental factors. Not only that, they will cause parts to rust and corrode. Over time, you will have to spend a lot of money on repairs. Therefore, to avoid these situations, you need to choose good quality multifunctional liquids.

+Cleaning ability

When exposed to smoky environments, you will not avoid the possibility of dirt entering the inside of the engine. These impurities will adhere to the walls and reduce the ability of the components to function.

Therefore, toyota transmission fluid type t iv needs to remove all this dirt. Cleaning the engine will help increase the performance of the car. It also helps prolong the life of the car.

+Optimizing drain interval

Optimizing the drain interval will help minimize the amount of dirt remaining in the fuel chamber. When gasoline is pumped in, air and dirt will also come along and create a film at the bottom. In the long run, they will stick to the inside of the fuel chamber and cause rust.

You need to look for a product that can completely remove these deposits to solve this problem. As the fuel exits the engine, the T-IV fluid will also push the dirt out of the fuel chamber.

Therefore, choosing a good product is very important. If you use a good quality transmission fluid, you can enjoy it without worrying about routine maintenance.

You Should Read:How much transmission fluid should I add? Find the answer right in article

Good Quality Substitutes

After learning about the characteristics of synthetic fluids, below we will recommend you the best quality alternatives for you to choose:

+Mobil ATF 3309

Mobil ATF 3309 is a product from the same brand as mobil 1 and pennzoil. This synthetic fluid is capable of meeting the car’s stats perfectly.

Thanks to Mobil ATF 3309, you can prevent oil hardening at low temperatures. This product can be used continuously no matter what the temperature is. At the same time, they will control the viscosity of the parts. When the engine is showing signs, Mobil will immediately kick in.

In particular, this synthetic liquid can also reduce noise and absolute shock resistance. No matter what terrain you are driving, the car can still move smoothly.

+Smith & Allan ATF 3309

For Smith & Allan ATF 3309, the manufacturer focused on engine lubrication. The internal parts will work smoothly without creating any friction when you use this product.

Despite its focus on lubrication, this transmission fluid does well for other tasks. Such as resistance to foaming and protection against corrosion. The parts will have a thin layer to completely prevent the penetration of dirt outside the environment.

In addition, Smith & Allan ATF 3309 also helps prolong the engine’s life. This product is highly resistant to oxidation so parts will be very unlikely to have problems related to rust. And most especially, all car models can use this liquid.

+Castrol Transmax Import ATF

Castrol Transmax Import ATF is a cheap product. If you are looking for a multi-functional and affordable liquid, this product is the first choice for you. You can find them at local dealers or websites like Amazon, Walmart,…

In terms of product features, Castrol can adapt to all weather conditions. Even if you use them at cold temperatures, they won’t freeze. The compounds inside can make the product melt on its own and always keep the oil in liquid form.

Castrol Transmax will work extremely well when used in Japanese-made cars such as Toyota, Honda,…. As can be seen, the manufacturer has selected a customer base suitable for the cost that the user needs.

+Idemitsu ATF Type TLS (T-IV)

Idemitsu ATF Type TLS is a synthetic liquid that is slightly more expensive than the ones above. And of course, a higher price means superior quality.

This product has features such as weather-adapting, high-performance lubrication. Idemitsu will help prolong the life of your vehicle. You won’t need too much maintenance because this liquid protects the engine from external deposits.

Conclusion

Choosing an alternative to T-IV transmission fluid will help you deal with more mechanical problems. Although this product is also quite good, it is only suitable for certain car models. If you don’t own it properly, car problems will only worsen.

The best way to prolong the life of your car is through regular maintenance under the guidance of experts. They will help you assess the quality and find the right products. From there, you will not need to worry about maintenance and use your car comfortably.

Finally, if you have any related questions, do not hesitate to leave a comment in the section below for us to promptly answer.

Share0

Tweet

Share

So, does a cold air intake increase MPG?

For them, a thermostat or standard radiator-like 2 row vs 3 row radiator for the engine is enough. However, this thinking is entirely wrong. The following article will help you realize the importance of cold airflow to the performance of the engine system.

What Is MPG?

MPG is a unit to measure the fuel consumption of any car engine. It is the number of miles driven per gallon. Currently, MPG is the standard unit for all car manufacturers. The manufacturer will rely on this parameter to adjust other details to minimize fuel consumption.

Does A Cold Air Intake Increase MPG?

The answer is yes. The amount of cold air can help increase the effective MPG index. When the airflow is drawn into the engine, it helps the system to operate in a stable condition. 

Overheating will not happen to your vehicle. Also, the check engine light will not appear intermittent flashing due to engine temperature problem.

The cold airflow will act as a new exhaust in operating principles. The air intake will help improve your vehicle’s MPG efficiency as it will allow more airflow to your engine. 

However, the increase in MPG will depend on your car. The same level of cold air but with different car models will be different. Up to a certain threshold, your car will not be able to increase the MPG index.

Using cold air for the engine system is correct in the long run. Because it increases the car’s performance, it also helps protect the engine from thermal problems. Thanks to that, your vehicle will continuously operate in the best condition.

Does Cold Air Reduce MPG?

The answer is yes. When the air intake is to improve the engine’s performance, the amount of cold air reduces the MPG. 

For example, when your car’s system lets water in, it can cause serious problems. At this time, cold air will help them overcome that situation. Although it reduces the car’s MPG, it will help keep your car safe.

How To Choose The Right One?

Choosing the right refrigerant intake system will help improve your engine’s performance. 

More cold air will be in the engine with a quality system. As a result, it will help ensure the car’s fuel is more efficient and evenly. At that time, the car running hot but not overheating will not happen to your vehicle.

In addition, if you want a cold air intake with long service life and can save fuel, you will need to determine if the air intake pipes are behind the grille. This determination will improve and ensure the air’s performance intake. The car engine can access the best airflow.

However, if the intake system draws hot air from the vehicle’s engine compartment, you should replace it with a cold intake system. It will help the process of regulating the engine temperature better. Besides using the air intake system, the thermostat is also an indispensable tool for every car. It will work with the air intake system to help regulate the engine temperature at a stable level.

Frequently Asked Questions(FAQ’s)

1.Do cold air intakes shorten engine life?

The answer is no. This type of air inlet will help your engine work well in all conditions. At the same time, all the surrounding details will also work well if you have a good filter. Therefore, before you intend to use the air intake, you should check the compatibility between the components in the same engine system.

2.How much horsepower does a cold air intake add?

When you introduce cold air into the engine system, your vehicle can more evenly mix the fuel with that air. 

At the same time, it will help to generate more capacity. In addition, when the amount of air passing through the intake manifold and filter is stabilized, the horsepower can be increased from 10-15 horsepower. 

Therefore, drivers should improve the cold air intake so that the maximum air passes through the intake manifold and filter.

3.Does the K&N filter increase performance?

The answer is yes. The K&N filter is to help improve the speed of torque and horsepower. At that time, more cold air will be in the engine system. This improvement will help your car burn more robust and stable fuel faster. These oil-based cotton filters can deliver up to 50% more air.

4.Do you need a tune after cold air intake?

You do not need to adjust your vehicle after installing the cold air intake. Because the adjustment will be costly for you, at the same time, it only helps to optimize the amount of cold air and will not have any other benefits. 

Therefore, you can upgrade and install it easily without any further adjustments with a cold air inlet.

Conclusion

Hopefully, this article will help you better understand the cold air intake for the car’s engine system. This part will significantly improve your car’s MPG index. The driver can travel longer distances and still save maximum fuel use at that time. 

However, the MPG improvement will need to depend on the vehicle you are using. With each car, it will have a specific limit. Therefore, once it has reached its maximum efficiency, the cold inlet will not improve the number of miles per gallon.

If you have any other related questions, don’t hesitate to leave a comment in the section below. We will try to respond promptly with our experience.

Share0

Tweet

Share

However, only when we use the correct dosage can the solvents in general, especially Transmission Fluid, in particular, maximize their effectiveness. 

In contrast, too much or too little will cause serious consequences. So how much transmission fluid should I add? Find the answer right in today’s article.

What Is Transmission Fluid?

First, you will need to have a basic understanding of Transmission Fluid to ensure that you truly understand and gain the necessary knowledge when working with this fluid.

Transmission Fluid is a liquid with the main component being base oil plus some additives to maximize the lubricating ability of this solvent. 

Unlike the solvents that have a lubricating and protective role we often see, transmission fluid is a specialized product for the gearbox and the unique needs of this part. 

So it’s not too difficult to understand when using transmission fluid for the region is quite near impossible. In addition, the color of this solvent is also quite remarkable.

What Happens If You Overfill Transmission Fluid?

From the start, manufacturers have been doing a lot of testing to determine precisely the correct dose. And of course, if you exceed this level, the consequences will be enormous.

First, if a substance is inside, the operation will be unstable as the solution can overflow due to the heat leaking to the outside. 

With a closed system and operating at high temperatures like an engine block, any liquid can be a disaster, and we need to stop this phenomenon immediately.

Besides, with its ability to catch fire, this solvent will inevitably create a fire right in your car.

How Much Transmission Fluid Should I Add?

Usually, there is no specific answer to the transmission fluid problem. 

Each vehicle with a different gearbox design and tank capacity will lead to huge differences. However, we still have a way to estimate the appropriate amount of Transmission Fluid to use.

Conventional car transmissions will require about 9 to 13 quarts of solvent to fill fully. Of course, we will not fill the tank with liquid. 

Also, the amount of transmission you add will vary depending on whether you are discharging or replacing all or just refilling.

Ideally, it would help if you only poured about half a liter of liquid at a time. The dip bar may be prominent, even if it’s not. Start the engine and let it run for about five minutes. 

Once the engine is warm, you can recheck the level. Add more liquid as needed until you get the full reading on the dipstick. 

Watch for signs of cold in a cold engine. The transmission fluid should be at its upper end. Otherwise, the hotspot should be at the upper end of the hotline.

How To Know If Your Transmission Is Overfilled

It shouldn’t be difficult for you to realize you’ve overfilled your condenser. 

The signs of this problem will often appear inconspicuous through various symptoms, such as the way the color of the smoke tells us what’s going on. And here are some problems you can face if you accidentally add too much solvent

• Leakage occurs, and a colorful puddle of liquid forms below the transmission line. To avoid the risk of confusion with other damage, you should check the gearbox seals for leaks.
• Another sign of too much transmission fluid is that you can’t shift appropriately because the quality of the solvent is no longer stable, which affects performance.
• Just like a lack of lubrication, your car’s transmission will overheat because the transmission fluid can no longer reduce friction as it should.

Overfilled Transmission Symptoms

Besides feeling-based, you can also identify a problem related to too much conductive fluid through the following symptoms:

Higher liquid level on dipstick

The toothpick is the most evident proof of whether the liquid is above the allowable level. By opening the bonnet on the car and then looking and observing the dipstick, you can easily detect the liquid status in the car, even if it is too little or too much. 

The right time to perform these tests is when the engine is hot because, like many fluids, Transmission Fluid expands when exposed to high temperatures. Therefore, if you only test when the engine is cold, the test quality will not be stable.

Changing Gears Problems 

The gears inside the gearbox always need to be perfectly lubricated to achieve the best operating state, thereby providing the most realistic shifting feeling for our users. 

Therefore, a problematic gear shift is inevitable if the transmission fluid, which plays a vital role in lubrication, does not perform its full function.

Strange noises

If you start hearing humming, grinding, or groaning, it could signify that something is wrong.

Frequently Asked Questions(FAQ’s)

How often do you need to change transmission fluid?

The most reasonable miles to change a new carrier are between 30,000 and 100,000 miles. 

Of course, higher numbers like 100,000 miles can still be reasonable, but it still depends on the type of vehicle you use.

What are the transmission fluid requirements?

Of course, the amount of transmission fluid required is specific to a particular vehicle type and model and will never be the same for another. So read the user manuals carefully from the supplier to get the complete look.

Conclusion

Through today’s article, we hope that you have gained the right amount of knowledge to use the right amount of transmission fluid to prevent problems related to Transmission Fluid overload.

Share0

Tweet

Share

And then, we need to clean them using many standard methods. But the problem is that the measures are pretty complicated, so is there another alternative to cleaning the mass airflow sensor?

It is probably what users are most interested in. Therefore, we will provide some mass air flow sensor cleaner alternatives below to answer your questions.

Cleaning Supplies

Before preparing cleaning items, you need to check the condition of the sensor. You can check by removing the MAF socket and starting the car. If there is no outlet and the car still usually works, then there is certainly no problem with the engine.

At that time, you should clean the sensor to make the car work more efficiently. But when starting, the car does not start, and you need to see a repair professional immediately because the sensor may be damaged.

Once the test is done, the user needs to prepare some cleaning tools:

• Protective Gloves
• Towels
• Spray bottle
• Isopropyl alcohol
• Induction cleaning kit

5 Mass Air Flow Sensor Cleaner Alternative

As we said above, the mass air flow sensor must work well. Instead of cleaning in the usual way, users can clean the airflow sensor with the following few products

Johnsen sensor cleaning kit

It is one of the most popular tools for high productivity dust cleaning. You will not be too worried about the usage of this product. Just press the spray button, and this fuel will spray into the sensor and clean it.

Whether adults or children, these operations are not complex. With a set of these, its price ranges from $7 to $8. You can buy it at a car repair shop or buy it online through websites.

Gunk MAS6

Compared to Johnsen, MAS6 is superior. In terms of operation, almost all sprays are the same. But this product easily cleans the long-standing dust oil, and helps the conversion process.

However, its cost is about 6$-7$ more than Johnsen’s. Depending on economic conditions, we choose the most suitable and effective product for ourselves.

Archoil MAF

This cleaning kit is more prevalent among users. Because it not only cleans the dirt, but the cleaning time is also speedy. Besides, it doesn’t leave any traces after wiping.

It is the perfect choice for motors that need electrical rehabilitation. With such high performance, a spray bottle of $26 is not too expensive.

CRC Cleaner, 4.5 Wt Oz.05610

In addition to cleaning, the CRC type is also known for building the powertrain, increasing horsepower, and optimizing the fuel-to-air ratio. The best-selling product is thanks to its fuel-saving mode and sensor protection.

Not only that, but it also reduces roughness during movement. Although it is so convenient, it is very cheap in terms of cost. Only $ 11 we own this multi-purpose cleaner.

No residue electric cleaner

If you do not want to buy the above products, you can also use electric cleaners. Its use is not inferior to the above types. However, it would help if you chose a residue-free type for cleaning.

Their method is similar to using alcohol. But this type is beneficial to users, so please consider carefully before buying.

Choosing one of the above products depends on your finances and car problems. However, the use of carburetor cleaner should be avoided to clean the air mass flow sensor.

Because carburetor cleaners contain many chemicals that damage the delicate sensor, note one thing, do not clean the MAF while the engine is running or the key is still in the car.

Cleaning Process

Using the cleaners is relatively easy, but we’ll still show you the process to get the most out of it.

• Step 1: Park the car in an open field to let the engine cool. Then, disconnect the car battery‘s negative terminal to avoid shock.
• Step 2: Find the sensor location. Usually, it’s located under the hood behind the air filter. For complex vehicles, use the manual to locate the MAF.
• Step 3: Remove the sensor from the motor. Disconnect all connected sources, including the intake manifold power supply, check engine light, and remove the hose clamps from the air ducts.
• Step 4: Cover the hot wires and plates and start spraying. After that, let it dry and return the sensor to its original position.
• Step 5: Start the car, reset the check engine light, and test drive.

Frequently Asked Questions(FAQ’s)

Can I use alcohol to clean it?

The answer is yes. But you should combine alcohol and spray for the sensor cleaning process to be highly effective. Avoid touching the hot wires, the sensor’s leads because they are pretty thin. You must cover other locations before cleaning the MAF.

Can the large air flow sensor be repaired?

The large airflow sensor is repairable. It only takes a few simple steps to remove screws and plastic components. However, to avoid errors and affect the car, it is much better to go to the maintenance shop instead of fixing it at home.

Does using the WD 40 sensor affect the engine?

The WD 40 sensor is the last option if the above products cannot be found. Although it can clean the MAF, it leaves behind dust particles. That is why consumers do not like to use this type of tool.

Dust particles are usually in the form of solvents to stick to the hot wire. From there, this layer of dust disturbs the airflow, leading to incorrect information transmitted.

Conclusion

The information above will help you choose alternative ways to clean the mass airflow sensor. There are many cleaning products on the market, but you need to select the most suitable and beneficial for your vehicle.

The above notes are mistakes that users have made, so consider carefully before using them! I hope the article brings valuable knowledge to you.

Thank you for reading!

Share0

Tweet

Share